Check category
Detail
EN61482-1-1:Protective clothing against the thermal hazards of an electric arc
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2017-07-26
- Views:5
EN61482-1-1:Protective clothing against the thermal hazards of an electric arc
These test methods measure the arc thermal performance value of materials which meet the following requirements: less than 100 mm char length and less than 2 s afterflame after removal from flame, when tested in accordance with ISO 15025, procedure B (bottom-edge ignition) on the outer material.
These methods are used to measure and describe the properties of materials, products, assemblies or garments, in response to convective and radiant energy generated by an electric arc in open air under controlled laboratory conditions.
The materials used in these methods are in the form of flat specimens for method A and garments for method B. Method A is used to determine the arc rating of materials and material assemblies when tested in a flat configuration. Method B is used to measure garment response, not arc rating, to an arc exposure including all the garment findings, sewing thread, fastenings, fabrics and other accessories when tested on a male mannequin torso. Method B is also used for accident replication.
Previous:
Polyamide & Nylon
Previous:
Polyamide & Nylon
Recommended products
FRClothing
#CFR410, is one line of DROTEX® FRCOTTON Series for industrial workwear which is in pure cotton.
Number of views:
1041
Keywords:
#CFR360, is one line of DROTEX® FRCOTTON Series for industrial workwear which is in pure cotton.
Number of views:
1026
Keywords:
#CFR350AS, is one line of DROTEX® FRCOTTON fabric series for industrial workwear which is made of 98% cotton and 2% antistatic fiber.
Number of views:
1013
Keywords:
FRIENDLY LINKS
Copyright © Xinxiang Zhuocheng Special Textile Co., Ltd. Powered by www.300.cn
The website already supports IPV6
Tel:+86-373-5898962 E-mail:info@zcsafety.com